iPhone 7 Usb Charging Problem Solution Jumper Ways

 IPhone 7 usb charge solution,

Unrecognized IPhone 7 USB not detected

Diagnosis: –

Plug the USB cable into the PC and the telephone jack, read the notifications on the screen phone recognized or not. Verify that you can save data to the memory card or not. Replace the USB data cable and try again.the diagram above. All these tracks are given in different colors so you can easily figure out the shapes of the bridge.

Therefore, if you experience a charging problem or a problem connecting your Samsung GT-I9500 to your computer via a USB cable, your iPhone 7 charge connector may be defective. Replacing it with a new one is the only solution here. But if by chance the USB connector is broken, then you have to make the jumpers as shown in the previous diagram

The charge connector pins may be damaged, corrosive or dusty.

The charger is out of order or not original. The battery may be defective or copied.

Battery terminals may be corrosive or damaged.

To solve the problem, you must first make sure that the wall charger you are using is working properly and the battery is not completely drained. Continue to inspect the plug of the charging plug or the DC connector, visually check for damage. Clean the charging pads on the PCB card and the battery connector. If the problem persists, continue troubleshooting the components.